...

What is the function of locating ring in injection mold?

Table of Contents

In injection moulding, a locating ring is a component used to position a mold in an injection molding machine. It is mounted on the moving platen of the machine and connected to the ejector system. The injection mold locating ring is a very simple part, but it is a very important part to fix the mold base to the injection molding machine.

Function of the locating rings

Locating Rings are used to locate the injection molds on the stationary plate (injection side) assuring that the nozzle on the molding machine will interface with the sprue bushing allowing the plastic to flow into the mold. The sprue orifice is usually in the center of a sprue bushing, and the locating ring aligns the bushing to the center of the platen.

The locating ring has a cylindrical inner surface that fits in with the corresponding surface on the die. The surface is used to align the mold during assembly and to support the mold during the injection.

The outer surface of the locating ring is textured or serrated to provide traction for the clamping system. The locating ring also has a series of holes for mounting the mold to the machine. These holes are located on the periphery of the ring and are spaced to align with the corresponding holes on the machine moving platens.

The positioning of locating ring is a structural part that plays a role in positioning when the mold is installed on the injection molding machine. The diameter of the domestically-made positioning ring is 0.2~0.4mm smaller than the panel hole of the injection molding machine.

Generally, large molds need to press the sprue sleeve with a locating ring to prevent the fixing screw from being broken by the reaction force during injection molding.

What is an injection-molded locating ring and how does it work?

A locating ring‘s basic job function is to locate or align the orifice of the hot or cold sprue with the through-hole in the machine’s stationary platen.

The locating ring is a metal ring used to locate the gate jacket in the mold hot runner system. It has high-temperature resistance and high precision. There are usually two types: A and B, but there are also different models for special needs.

The role of the mold locating ring is to ensure that the gate sleeve of the injection mold and the nozzle position of the injection molding machine is level and completely coincide when the injection molding machine is on the movable mold.

A locating ring is a device that helps to hold an object in the desired position during a manufacturing process, such as injection moulding, which is placed around the object and then clamps it in place. This ensures that the object remains in the same position during injection molding, which helps improve the quality of the final product.

There are different types of locating rings to choose from and the best type for a particular application will depend on factors such as the size and shape of the object being molded. In some cases, multiple locating rings can be used to achieve the desired effect.

Advantages of using locating ring in the injection molding process

In plastic injection molding, a locating ring is used to help hold the mold in place and ensure that the molten plastic is injected in the correct position. It helps to align the machine nozzle with the central length of the sprue bush.

Its purpose is to register (or locate) the mold in the correct position on the injection machine, to ensure proper alignment between the nozzle and the outer diameter sprue bush, thereby eliminating leakage.

By using a locating ring, manufacturers can reduce the time and effort required to set up the mold and the amount of material wasted during the injection process.

In addition, the locating ring ensures that molded parts have a consistent shape and size, thus helping to improve the quality of the finished product. Therefore, the use of a locating ring has many benefits for both manufacturers and consumers.

Types of locating rings for the injection molding

Injection molding is a process that can be used to make various parts and products. To produce high-quality parts, it is necessary to have a well-designed, functional mold. A key element of the mold is the locating ring, which is used to hold the mold in place during the injection.

There are three main types of locating rings: linear, frictional, and hydraulic. Each type has its advantages and disadvantages that should be considered when selecting rings for a particular application.

Linear rings

Linear rings are the most common types of locating rings. They are simple and reliable, but they can be difficult to adjust if the injection mold needs to be repositioned. The friction ring relies on friction to hold the mold in place. They provide good retention and are easy to adjust, but they wear out over time.

Frictional rings

Friction rings rely on friction to hold the mold in place. They provide good holding power and are easy to adjust, but they wear out over time.

Hydraulic rings

Hydraulic rings use hydraulic pressure to hold the die. They provide good holding power and are easy to adjust, but they require a more complex injection setup.

Application of locating ring in an injection molding process

The use of a locating ring during injection molding helps prevent defects that may occur during high-speed processes. By applying a locating ring at the end of the molding process, it is easier to distribute the molten plastic evenly and prevent voids.

In addition, if the gate is not properly ventilated, a flash or short shot can occur. These defects can be avoided by using a locating ring on the gate to better control the flow of material into the cavity.

The application of a locating ring can also improve the appearance of the molded part by helping to ensure the correct placement of the gate and trimming.

Finally, they can improve productivity by reducing cycle time and material waste. Overall, the use of locating rings can have a significant positive impact on injection molded parts.

Tips for choosing the right locating ring type

The application of a locating ring for injection molding is an important step in achieving a high level of productivity and avoiding production problems. The main function of the locating ring is to position and support the core during the injection. It is also necessary to prevent the core from moving during cooling and ejection.

There are different types of locating rings on the market, so it is important to choose the type that fits your requirements. Here are some tips to help you choose the right type of locating ring.

First, you need to determine the application and choose the appropriate locating ring type accordingly.

Then, you need to consider the size and dimensions of the ring. Choose rings of the right size to meet the needs of your application.

Third, you need to consider the material of the ring. Different materials have different properties, so choose the right material for your application.

Fourth, you need to consider the price of the locating ring. Choose a reasonably priced ring that fits your budget.

Finally, you need to consider the supplier of the locating ring. Choose a reputable, trusted supplier who can provide you with a high-quality product.

Summary

Details determine success or failure. The injection mold locating ring is a very simple part, but it is a very important part to fix the injection mold to the injection molding machine. To make a good injection mold, the components and accessories involved in the injection mold need to be well thought out.

Latest Posts
Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest
Tell us your request right now and contact us today about getting started on your next project together!

Email: info@zetarmold.com

Or Fill Out The Contact Form Below:

Спросите быструю цитату

Мы свяжемся с вами в течение одного рабочего дня, обратите внимание на письмо с суффиксом «xx@zetarmold.com».

Ask For A Quick Quote

Send drawings and detailed requirements via 

Emial:inquiry@zetarmold.com

Or Fill Out The Contact Form Below:

Ask For A Quick Quote

Send drawings and detailed requirements via 

Emial:inquiry@zetarmold.com

Or Fill Out The Contact Form Below:

Ask For A Quick Quote

Send drawings and detailed requirements via 

Emial:inquiry@zetarmold.com

Or Fill Out The Contact Form Below: