What Is Metal-to-Plastic Conversion?

Metal-to-plastic conversion is the engineering process of replacing metal components (typically machined steel, die-cast aluminum, or brass) with high-performance engineering thermoplastics. This shift is driven by the need for lightweighting industrial parts, corrosion resistance, and cost reduction.

It is not merely a material swap; it is a redesign process. A part originally designed for metal machining cannot simply be molded in plastic without modification. Wall thickness, ribbing structures, and gate locations must be re-engineered to handle structural loads using polymer physics (viscoelasticity) rather than metal elasticity.

Technical Comparison: Metal vs. Structural Plastics

The decision to convert relies on matching the physical properties of metals with reinforced polymers.

Data Sources: ASTM Standards / MatWeb.

Case Study: Replacing Aluminum with PEEK in Aerospace

挑戦

A manufacturer of aerospace fuel pump housings was using machined アルミニウム6061. The part required intricate internal channels, 5-axis CNC machining, and anodizing for corrosion protection. The weight was critical, and the multi-step manufacturing process created a bottleneck.

ソリューション

The engineering team converted the housing to ポリエーテルエーテルケトン（PEEK）² reinforced with 30% carbon fiber.

• プロセス Injection Molding (Single shot).
• 素材： PEEK 450CA30.
• Design Change: Wall thicknesses were unified to 3mm to prevent sink marks. Ribs were added to the external housing to match the stiffness of the original aluminum part.

The Results

1. 軽量化： 48% lighter (Specific Gravity drop from 2.7 to 1.4).
2. Cost Savings: 35% reduction per unit. Although PEEK material cost is 10x higher than aluminum, the elimination of 4 hours of CNC machining and anodizing per part offset the raw material cost.
3. パフォーマンス The PEEK part offered superior chemical resistance to jet fuel compared to the anodized aluminum, which was prone to pitting over time.

Step-by-Step Process for Structural Plastic Design

To successfully execute metal to plastic conversion case studies, engineers follow this workflow:

1. Load Analysis: Determine the mechanical loads (tensile, compressive, torque). If the temperature exceeds 200°C continuously, options narrow to PEEK, PPS, or LCP.
2. 素材の選択³:
   • High Load/Impact: Nylon 66 (PA66) + Glass Fiber.
   • High Heat/Chemicals: PEEK, PPS, or Ultem (PEI).
   • Precision/Dimensional Stability: Polycarbonate (PC) or PBT.
3. Geometry Optimization⁴:
   • Replace Mass with Ribs: Do not mimic solid metal blocks. Use coring techniques to remove mass and add ribs for stiffness.
   • Add Draft Angles: Metal parts often have 0° walls; plastic requires 0.5°–1.0° draft for ejection.
   • Radius Corners: Sharp corners in plastic concentrate stress (notch sensitivity), leading to failure. Add radii (fillets) to all internal corners.
4. プロトタイピング⁵: Use CNC machining of the plastic stock or 3D printing (SLS) with comparable reinforced powders to validate fit and assembly before cutting the steel mold.
5. Tooling: Build the mold, usually from hardened steel (H13), anticipating the high abrasion of glass/carbon fillers.

Benefits and Limitations

Practical Tips for Engineering Success

• The "Steel Safe" Rule: When designing the mold, leave the plastic "steel safe" (leave more metal on the mold, resulting in less plastic on the part) in critical fit areas. It is easy to remove metal from the mold to add plastic; it is expensive to weld metal back in.
• インサート成形⁶: If you need metal-like thread strength, don’t tap threads into the plastic. Use インサート成形 to encapsulate brass nuts or steel bushings directly into the part during the molding cycle.
• Orientation Matters: In fiber-reinforced plastics, strength is anisotropic (stronger in the direction of flow). Analyze gate locations to ensure fibers align with the primary stress vectors.

よくある質問（FAQ）

Q: Can plastic really replace stainless steel?
A: For structural housing and brackets, yes. Long-fiber reinforced thermoplastics (LFRT)⁷ can replace steel. However, for applications requiring high surface hardness (knife edges) or extreme heat (>300°C), steel remains superior.

Q: What is the biggest mistake in metal-to-plastic conversion?
A: "Same-shape replacement." Designers often try to mold the exact shape of the machined metal part. This leads to thick wall sections that cause sink marks, voids, and long cycle times. The part must be redesigned with uniform wall thickness.

Q: How much weight can I save?
A: Typically 30-50%. Aluminum has a specific gravity of ~2.7; reinforced Nylon is ~1.5. PEEK is ~1.3.

Q: Is PEEK the only option for metal replacement?
A: No. PEEK is for extreme performance. For general industrial replacement (brackets, handles, covers), Glass-Filled Nylon (PA66) または Polybutylene Terephthalate (PBT) are standard, cost-effective choices.

Q: How does plastic handle impact compared to metal?
A: Unfilled plastics can be brittle. However, "impact-modified" grades (like PC/ABS blends or toughened Nylon) can actually survive drops better than cast metal because they flex and recover rather than permanently deforming or cracking.

概要

Metal-to-plastic conversion is a strategic engineering choice that yields injection molding cost savings and performance benefits in weight and chemical resistance. By leveraging materials like Glass-Filled Nylon または replacing aluminum with PEEK, manufacturers can consolidate complex assemblies into single molded parts. The key to success lies in redesigning the component to respect the rules of plastic flow and thermal behavior, rather than treating plastic as a direct substitute for metal blocks.