{"id":16486,"date":"2023-01-26T10:00:00","date_gmt":"2023-01-26T02:00:00","guid":{"rendered":"https:\/\/zetarmold.com\/?p=16486"},"modified":"2026-05-02T21:32:09","modified_gmt":"2026-05-02T13:32:09","slug":"%eb%93%9c%eb%9e%98%ed%94%84%ed%8a%b8-%ec%95%b5%ea%b8%80-%ec%82%ac%ec%b6%9c-%ec%84%b1%ed%98%95","status":"publish","type":"post","link":"https:\/\/zetarmold.com\/ko\/%eb%93%9c%eb%9e%98%ed%94%84%ed%8a%b8-%ec%95%b5%ea%b8%80-%ec%82%ac%ec%b6%9c-%ec%84%b1%ed%98%95\/","title":{"rendered":"\uc0ac\ucd9c \uc131\ud615\uc5d0\uc11c \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\ub780 \ubb34\uc5c7\uc778\uac00\uc694?"},"content":{"rendered":"<p>\u2013 \uc18c\ud615 \ubd80\ud488 <a href=\"https:\/\/en.wikipedia.org\/wiki\/Draft_(engineering)\">\uad6c\ubc30 \uac01\ub3c4<\/a><sup id=\"fnref1:1\"><a href=\"#fn:1\" class=\"footnote-ref\">1<\/a><\/sup>.<\/p>\n<p>In this guide, I\u2019ll walk through what draft angle is, how to calculate it for different materials and surface finishes, and the specific numbers we use on the shop floor after 20+ years of making injection molds. No theory without practice \u2014 just the rules that actually work.<\/p>\n<div class=\"callout-key\" style=\"background:#f0f7ff; border-left:4px solid #2563eb; padding:1em 1.2em; border-radius:6px; margin:1.5em 0;\">\n<strong>\uc8fc\uc694 \ub0b4\uc6a9<\/strong><\/p>\n<ul>\n<li>Draft angle is the taper on vertical mold surfaces that lets parts eject cleanly<\/li>\n<li>Most parts need 1\u20133\u00b0 minimum draft; textured surfaces need 1\u20131.5\u00b0 extra per 0.001\u2033 texture depth<\/li>\n<li>Harder plastics (PC, POM) and glossy finishes require more draft than soft or matte ones<\/li>\n<li>Missing or insufficient draft causes sticking, scratches, and cycle time increases<\/li>\n<li>Always apply draft in the direction of mold opening \u2014 and verify with your molder before tooling<\/li>\n<\/ul>\n<\/div>\n<h2>What Is a Draft Angle in Injection Molding?<\/h2>\n<p>A draft angle in injection molding is defined by the function, constraints, and tradeoffs explained in this section. A draft angle is the deliberate taper you build into every vertical face of a part so it can be ejected from the injection molding tool without fighting friction. Think of it like the slight slope on the inside of an ice cube tray \u2014 without that slope, you\u2019d never get the ice out in one piece.<\/p>\n<p>In technical terms, draft angle is measured in degrees from the vertical axis of the mold opening direction. If a wall is perfectly perpendicular to the parting line (0\u00b0 draft), the part creates a vacuum seal against the steel as it cools and shrinks. That seal is what makes <a href=\"https:\/\/en.wikipedia.org\/wiki\/Injection_moulding#Ejection\">ejection<\/a><sup id=\"fnref1:2\"><a href=\"#fn:2\" class=\"footnote-ref\">2<\/a><\/sup> brutal \u2014 or impossible. Adding even 0.5\u00b0 of taper breaks that seal and lets air in behind the part during ejection.<\/p>\n<figure style=\"text-align:center;margin:2em 0;\">\n<img fetchpriority=\"high\" decoding=\"async\" width=\"800\" height=\"457\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/04\/micro-molded-parts-closeup.jpg\" alt=\"Micro Molded Parts &amp; Precision Injection Molded Closeup\" class=\"wp-image-53228 size-full\" style=\"max-width:100%;height:auto;\" srcset=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/04\/micro-molded-parts-closeup.jpg 800w, https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/04\/micro-molded-parts-closeup-300x171.jpg 300w, https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/04\/micro-molded-parts-closeup-768x439.jpg 768w, https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/04\/micro-molded-parts-closeup-18x10.jpg 18w, https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/04\/micro-molded-parts-closeup-600x343.jpg 600w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><figcaption style=\"font-size:0.78em; color:#888; font-style:italic; margin-top:4px; text-align:center;\">\ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\ub97c \uac00\uc9c4 \uc815\ubc00 \uc131\ud615 \ubd80\ud488<\/figcaption><\/figure>\n<p>Here\u2019s a number that surprises a lot of designers: the friction force between a cooling plastic part and a polished steel core can exceed 500 N per square centimeter of contact area. On a part with a 50 mm tall cylindrical wall, that\u2019s potentially thousands of newtons of holding force working against your ejector pins. Draft angle is what keeps that force manageable.<\/p>\n<p>In our shop, we\u2019ve seen parts come in for rework where the original designer specified 0\u00b0 draft on a 40 mm deep bore. The result? Every 20th part stuck and had to be pried out manually \u2014 on a high-speed production run of 100,000 parts. The fix was a mold modification costing $3,500 and two weeks of lost production. A 1\u00b0 draft from the start would have cost exactly nothing.<\/p>\n<div class=\"claim claim-true\" style=\"background-color: #eff7ef; border-color: #eff7ef; color: #5a8a5a;\">\n<p><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"#16a34a\" stroke-width=\"2\"><path d=\"M9 16.17L4.83 12l-1.42 1.41L9 19 21 7l-1.41-1.41z\"\/><\/svg><b>\u201cAdding just 0.5\u00b0 of draft angle can break the vacuum seal between a plastic part and the mold core, making ejection possible.\u201d<\/b><span class=\"claim-true-or-false\">True<\/span><\/p>\n<p class=\"claim-explanation\">Even a tiny taper allows air to flow behind the part during ejection, dramatically reducing the force needed to separate the part from the steel. Without any draft, the vacuum effect can make ejection physically impossible without damaging the part.<\/p>\n<\/div>\n<div class=\"claim claim-false\" style=\"background-color: #f7e8e8; border-color: #f7e8e8; color: #8a4a4a;\">\n<p><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"#dc2626\" stroke-width=\"2\"><line x1=\"18\" y1=\"6\" x2=\"6\" y2=\"18\"\/><line x1=\"6\" y1=\"6\" x2=\"18\" y2=\"18\"\/><\/svg><b>\u201cDraft angle is only necessary on the cavity side of the mold, not the core side.\u201d<\/b><span class=\"claim-true-or-false\">False<\/span><\/p>\n<p class=\"claim-explanation\">The opposite is true: the core side is where draft matters most. As plastic shrinks during cooling, it grips the core tighter. The cavity side actually benefits from natural <a href=\"https:\/\/en.wikipedia.org\/wiki\/Shrinkage\">\uc218\ucd95<\/a><sup id=\"fnref1:3\"><a href=\"#fn:3\" class=\"footnote-ref\">3<\/a><\/sup> pulling the part away from the steel. This is why core-side draft specifications are always more critical in mold design.<\/p>\n<\/div>\n<h2>Why Do Injection Molded Parts Need Draft Angles?<\/h2>\n<p>\uc774 \uc139\uc158\uc740 \uc0ac\ucd9c \uc131\ud615 \ubd80\ud488\uc774 \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\uac00 \ud544\uc694\ud558\uba70 \uc774\uac00 \ube44\uc6a9, \ud488\uc9c8, \uc2dc\uae30 \ub610\ub294 \uc870\ub2ec \ub9ac\uc2a4\ud06c\uc5d0 \ubbf8\uce58\ub294 \uc601\ud5a5\uc5d0 \uad00\ud55c \uac83\uc785\ub2c8\ub2e4. \ubd80\ud488\uc5d0 \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\uac00 \ud544\uc694\ud55c \uc774\uc720\ub294 \uac01\ub3c4 \uc5c6\uc774 \ud50c\ub77c\uc2a4\ud2f1\uc774 \ub0c9\uac01 \uc911 \uae08\ud615 \ucf54\uc5b4\uc5d0 \ub2e8\ub2e8\ud788 \uc218\ucd95\ub418\uc5b4 \ub9c8\ucc30\uc774 \ubc1c\uc0dd\ud558\uc5ec \uc774\uc81d\uc158\uc744 \ubd88\uac00\ub2a5\ud558\uac8c \ud558\uac70\ub098 \ucd5c\uc18c\ud55c \uc190\uc0c1\uc744 \uc77c\uc73c\ud0a4\uae30 \ub54c\ubb38\uc785\ub2c8\ub2e4. \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4(\uc218\uc9c1 \ud45c\uba74\uc758 \ud14c\uc774\ud37c)\ub294 \uc9c4\uacf5 \ubc00\ubd09\uc744 \uae68\uace0 \uc811\ucd09 \ub9c8\ucc30\uc744 \uc904\uc5ec \ub9e4 \uc0ac\uc774\ud074\ub9c8\ub2e4 \uae68\ub057\ud558\uace0 \uc548\uc815\uc801\uc778 \ubd80\ud488 \uc81c\uac70\ub97c \uac00\ub2a5\ud558\uac8c \ud569\ub2c8\ub2e4. \ud53c\ucc98\uac00 \ub192\uace0 \uc7ac\ub8cc\uac00 \uac15\ud560\uc218\ub85d \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\ub294 \ub354\uc6b1 \uc911\uc694\ud574\uc9d1\ub2c8\ub2e4.<\/p>\n<p>During cooling, thermoplastic shrinks toward the center of its mass. On external features (cavity side), this shrinkage pulls the plastic away from the steel \u2014 that\u2019s helpful. But on internal features (core side), shrinkage pulls the plastic tighter onto the steel. The taller and straighter the core surface, the more contact area, the more friction, the harder the ejection. Draft angle progressively reduces that contact area from bottom to top.<\/p>\n<p>\uc801\uc808\ud55c \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4 \uc5c6\uc774\ub294 \uc0dd\uc0b0 \uc804\ubc18\uc5d0 \uac78\uccd0 \uc5ec\ub7ec \ubb38\uc81c\uac00 \uc5f0\uc1c4\uc801\uc73c\ub85c \ubc1c\uc0dd\ud560 \uac83\uc785\ub2c8\ub2e4: \uc218\ub3d9 \uc81c\uac70\uac00 \ud544\uc694\ud55c \ubd80\ud488 \uace0\ucc29, \ub9e4 \uc0ac\uc774\ud074\ub9c8\ub2e4 \ubc1c\uc0dd\ud558\ub294 \ud45c\uba74 \uae01\ud798 \ubc0f \ub04c\ub9bc \uc790\uad6d, \uc870\uae30 \ud540 \ud30c\uc190\uc73c\ub85c \uc774\uc5b4\uc9c0\ub294 \uc774\uc81d\ud130 \ud540 \uc751\ub825 \uc99d\uac00, \ub4a4\ud2c0\ub9bc\uc774\ub098 \uade0\uc5f4\uc744 \uc720\ubc1c\ud558\ub294 \ubd88\uade0\uc77c\ud55c \uc774\uc81d\uc158, \uadf8\ub9ac\uace0 \uc774\uc81d\uc158 \ub2e8\uacc4\ub97c \uc548\uc804\ud558\uac8c \uac00\uc18d\ud560 \uc218 \uc5c6\uc5b4 \uc0ac\ucd9c \uc131\ud615 \uc0dd\uc0b0 \uc2dc\uac04\uc774 \uae38\uc5b4\uc9d1\ub2c8\ub2e4.<\/p>\n<p>I\u2019ve also seen cases where zero-draft parts would eject fine on the first 50 shots of a new, polished tool \u2014 but started sticking after 5,000 shots as the mold surface developed microscopic wear. Draft isn\u2019t just about making it work on day one; it\u2019s about making it work reliably for the life of the tool.<\/p>\n<p>There\u2019s a secondary benefit that\u2019s often overlooked: draft angle improves airflow and coolant flow inside the mold. Tapered surfaces create a natural vent path that helps trapped air and gas escape during filling. This reduces burn marks, short shots, and the need for complex venting schemes \u2014 especially on deep-ribbed parts.<\/p>\n<h2>What Factors Affect the Required Draft Angle?<\/h2>\n<p>\uc774 \uc139\uc158\uc740 \ud544\uc694\ud55c \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\uc5d0 \uc601\ud5a5\uc744 \ubbf8\uce58\ub294 \uc694\uc778\uacfc \uadf8 \uc694\uc778\uc774 \ube44\uc6a9, \ud488\uc9c8, \uc2dc\uae30 \ub610\ub294 \uc870\ub2ec \ub9ac\uc2a4\ud06c\uc5d0 \ubbf8\uce58\ub294 \uc601\ud5a5\uc5d0 \uad00\ud55c \uac83\uc785\ub2c8\ub2e4. \ud544\uc694\ud55c \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\ub97c \uacb0\uc815\ud558\ub294 \ub2e4\uc12f \uac00\uc9c0 \uc8fc\uc694 \uc694\uc778\uc740 \ub2e4\uc74c\uacfc \uac19\uc2b5\ub2c8\ub2e4: \uc7ac\ub8cc \uac15\uc131, \ud45c\uba74 \ub9c8\uac10, \ubd80\ud488 \ud615\uc0c1(\ud53c\ucc98 \uae4a\uc774), \ubcbd \ub450\uaed8, \uc0dd\uc0b0\ub7c9. \uac15\uc131 \ud50c\ub77c\uc2a4\ud2f1, \ud14d\uc2a4\ucc98 \ud45c\uba74, \uae4a\uc740 \ud53c\ucc98, \ub300\ub7c9 \uc0dd\uc0b0\uc740 \ubaa8\ub450 \ud544\uc694\ud55c \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\ub97c \ub192\uc785\ub2c8\ub2e4 \u2014 \uae4c\ub2e4\ub85c\uc6b4 \uc870\ud569\uc758 \uacbd\uc6b0 \uc77c\ubc18\uc801\uc73c\ub85c 1.5\u20133\u00b0, \uc26c\uc6b4 \uacbd\uc6b0 0.5\u20131\u00b0\uc785\ub2c8\ub2e4.<\/p>\n<p>Material stiffness: Rigid materials like polycarbonate (PC), POM (acetal), and glass-filled nylons resist deformation during ejection. They don\u2019t \u201cgive\u201d as they slide off the core, so they need more draft \u2014 typically 1.5\u20133\u00b0. Softer materials like TPU, PE, and PP can tolerate less draft (0.5\u20131\u00b0) because they flex slightly during ejection and release more easily.<\/p>\n<p>Surface finish: This is the factor that catches people off guard. A polished (A1 or A2 SPI finish) mold surface has low friction, so 0.5\u20131\u00b0 draft might suffice. But a textured surface (SPI B, C, or D finish, or EDM) acts like microscopic teeth gripping the plastic. For every 0.001\u2033 (0.025 mm) of texture depth, you need to add 1\u20131.5\u00b0 of additional draft.<\/p>\n<div class=\"claim claim-true\" style=\"background-color: #eff7ef; border-color: #eff7ef; color: #5a8a5a;\">\n<p><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"#16a34a\" stroke-width=\"2\"><path d=\"M9 16.17L4.83 12l-1.42 1.41L9 19 21 7l-1.41-1.41z\"\/><\/svg><b>\u201cA deep leather-grain texture at 0.004\u2033 depth may require 4\u20136\u00b0 of additional draft angle on top of the base material draft.\u201d<\/b><span class=\"claim-true-or-false\">True<\/span><\/p>\n<p class=\"claim-explanation\">Texture depth is one of the most underestimated factors in draft angle specification. Each 0.001\u2033 of texture depth adds roughly 1\u20131.5\u00b0 of required draft. A deep leather grain at 0.004\u2033 is actually a common specification that catches many designers off guard, especially when the texture is applied after the initial mold design is complete.<\/p>\n<\/div>\n<div class=\"claim claim-false\" style=\"background-color: #f7e8e8; border-color: #f7e8e8; color: #8a4a4a;\">\n<p><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"#dc2626\" stroke-width=\"2\"><line x1=\"18\" y1=\"6\" x2=\"6\" y2=\"18\"\/><line x1=\"6\" y1=\"6\" x2=\"18\" y2=\"18\"\/><\/svg><b>\u201cTextured mold surfaces require the same draft angle as polished surfaces because the texture does not affect friction.\u201d<\/b><span class=\"claim-true-or-false\">False<\/span><\/p>\n<p class=\"claim-explanation\">Textured surfaces dramatically increase friction during ejection. The microscopic peaks and valleys of the texture interlock with the plastic surface, creating mechanical resistance that polished steel simply does not have. This is why textured molds always need significantly more draft \u2014 often 3\u20136\u00b0 more than their polished equivalents.<\/p>\n<\/div>\n<p>Part geometry: Deep draws, tall ribs, and long cores all amplify friction. A 10 mm deep pocket with 1\u00b0 draft works fine; a 100 mm deep pocket with 1\u00b0 draft is a recipe for sticking because the contact area is 10\u00d7 larger. As a rule of thumb, for features deeper than 50 mm, increase draft by at least 0.5\u00b0 per additional 25 mm of depth.<\/p>\n<p>Wall thickness: Thicker walls shrink more, which increases the gripping force on cores. A 4 mm wall section will need more draft than a 1.5 mm section for the same geometry and material.<\/p>\n<p>Production volume: For low-volume prototype <a href=\"https:\/\/zetarmold.com\/ko\/%ec%82%ac%ec%b6%9c-%ea%b8%88%ed%98%95-%ec%99%84%eb%b2%bd-%ea%b0%80%ec%9d%b4%eb%93%9c\/\">\uc0ac\ucd9c \uae08\ud615 \uc124\uacc4<\/a> and tooling (under 1,000 shots), you can get away with less draft because the tool stays pristine. For production tooling running 100K+ cycles, generous draft is essential \u2014 the mold surface will degrade over time, and what works on shot #1 may stick on shot #50,000.<\/p>\n<h2>How Do You Calculate the Correct Draft Angle?<\/h2>\n<p>There are two practical approaches: rule-of-thumb tables and CAD-based analysis. For most parts, the table-based method is sufficient. For high-precision or complex parts, CAD simulation catches problems the tables miss.<\/p>\n<figure style=\"text-align:center;margin:2em 0;\">\n<img decoding=\"async\" width=\"800\" height=\"457\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/12\/plastic-injection-mold-parts-display.webp\" alt=\"Prototype injection mold and parts display\" class=\"wp-image-51685 size-full\" style=\"max-width:100%;height:auto;\" srcset=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/12\/plastic-injection-mold-parts-display.webp 800w, https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/12\/plastic-injection-mold-parts-display-300x171.webp 300w, https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/12\/plastic-injection-mold-parts-display-768x439.webp 768w, https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/12\/plastic-injection-mold-parts-display-18x10.webp 18w, https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/12\/plastic-injection-mold-parts-display-600x343.webp 600w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><figcaption style=\"font-size:0.78em; color:#888; font-style:italic; margin-top:4px; text-align:center;\">\ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4 \uacc4\uc0b0\uc740 \uae68\ub057\ud55c \uc774\uc81d\uc158\uc744 \ubcf4\uc7a5\ud569\ub2c8\ub2e4<\/figcaption><\/figure>\n<p><b>\uae30\ubcf8 \uacf5\uc2dd: \uc8fc\uc5b4\uc9c4 \ud53c\ucc98 \uae4a\uc774(H)\uc640 \uc0c1\ub2e8\uc5d0\uc11c \uc6d0\ud558\ub294 \uac04\uaca9(C)\uc5d0 \ub300\ud574, \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4 \u03b8 = arctan(C \/ H)\uc785\ub2c8\ub2e4.<\/b> \uc2e4\uc81c\ub85c \ub300\ubd80\ubd84\uc758 \uc5d4\uc9c0\ub2c8\uc5b4\ub4e4\uc740 \uc774\ub97c \uacc4\uc0b0\ud558\uc9c0 \uc54a\uc2b5\ub2c8\ub2e4 \u2014 \uc7ac\ub8cc\ubcc4 \ucd5c\uc18c\uac12\uc744 \ucc38\uc870\ud558\uace0 \uc548\uc804 \uc5ec\uc720\ub97c \ucd94\uac00\ud569\ub2c8\ub2e4.<\/p>\n<p>Rule of thumb for smooth surfaces:<br \/>\n\u2013 Small parts (<50 mm feature depth): \u22651\u00b0\n- medium parts (50\u2013150 \u22651.5\u00b0\n- large (>\ud3f4\ub9ac\uce74\ubcf4\ub124\uc774\ud2b8\uc5d0 \ud544\uc694\ud55c \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\ub294 \uc5bc\ub9c8\uc785\ub2c8\uae4c?<br \/>\n\u2013 All surfaces: minimum 0.5\u00b0 even for low-friction materials<\/p>\n<p>Texture adjustment: For textured surfaces, add 1\u20131.5\u00b0 per 0.001\u2033 (0.025 mm) of texture depth. Your <a href=\"https:\/\/zetarmold.com\/ko\/injection-molding-supplier-sourcing-guide\/\">\uc0ac\ucd9c \uc131\ud615 \uacf5\uae09\uc5c5\uccb4<\/a> should provide the exact depth specification \u2014 always confirm with them before finalizing draft.<\/p>\n<p>CAD-based analysis: Modern mold flow simulation tools (Moldflow, Moldex3D) can predict ejection forces and identify areas where draft is insufficient. We run these simulations on complex parts to catch draft-related issues before steel is cut. It\u2019s far cheaper to fix a CAD model than to re-cut a cavity.<\/p>\n<p>One practical tip we use on the shop floor: when in doubt, add draft. It\u2019s almost never wrong to have more draft than the minimum \u2014 the only cases where excessive draft causes problems are precision fits and snap-fit features where the taper changes the geometry. For those features, you specify draft direction (toward or away from the functional surface) and verify with tolerances.<\/p>\n<h2>What Draft Angle Standards Should You Follow by Material?<\/h2>\n<p>For smooth mold surfaces, most engineering plastics (ABS, PA66, PC) need 1\u20132\u00b0 of draft, while softer materials like PP and TPU can get by with 0.5\u20131\u00b0. High-temperature or glass-filled materials like PEEK and GF-PA66 require 1.5\u20133\u00b0. For every step of texture depth (0.001\u2033), add another 1\u20131.5\u00b0 on top of these base values. The table below breaks it down by material.<\/p>\n<table style=\"width:100%;border-collapse:collapse;margin:1.5em 0;\">\n<caption style=\"font-weight:bold;margin-bottom:0.5em;\">Recommended Draft Angles by Material (Smooth Mold Surface)<\/caption>\n<thead>\n<tr>\n<th style=\"border:1px solid #ddd;padding:8px;background:#f5f5f5;\">\uc7ac\ub8cc<\/th>\n<th style=\"border:1px solid #ddd;padding:8px;background:#f5f5f5;\">Min. Draft (\u00b0)<\/th>\n<th style=\"border:1px solid #ddd;padding:8px;background:#f5f5f5;\">Recommended (\u00b0)<\/th>\n<th style=\"border:1px solid #ddd;padding:8px;background:#f5f5f5;\">\ucc38\uace0<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border:1px solid #ddd;padding:8px;\">ABS<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.5<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">1.0\u20131.5<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">Low shrinkage; forgiving<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #ddd;padding:8px;\">PC<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.5<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">1.0\u20132.0<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">Rigid; higher friction<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #ddd;padding:8px;\">PA66<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.5<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">1.0\u20131.5<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">Glass-filled needs more<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #ddd;padding:8px;\">PP<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.25<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.5\u20131.0<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">Soft; easy release<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #ddd;padding:8px;\">POM<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.5<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">1.0\u20132.0<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">Rigid but slippery<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #ddd;padding:8px;\">TPU<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.25<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.5\u20131.0<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">Elastomeric; self-releasing<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #ddd;padding:8px;\">PEEK<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.5<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">1.5\u20133.0<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">High-temp; generous draft needed<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #ddd;padding:8px;\">PMMA<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">0.5<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">1.0\u20132.0<\/td>\n<td style=\"border:1px solid #ddd;padding:8px;\">Brittle; needs smooth ejection<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Important caveat: these are for smooth (SPI A-2 or better) mold surfaces. For every step down in surface finish (polished \u2192 fine matte \u2192 coarse matte \u2192 textured), add 0.5\u20131.5\u00b0 to the recommended draft. For EDM surfaces, add 1\u20132\u00b0 minimum.<\/p>\n<p>Glass-filled grades deserve special mention. When you move from unfilled PA66 to 30% glass-filled PA66, the part becomes significantly more rigid and abrasive. The filler also increases the surface roughness of the molded part, which increases friction during ejection. Our rule: add 0.5\u20131\u00b0 extra for any glass-filled or mineral-filled grade.<\/p>\n<h2>What Are Common Draft Angle Mistakes?<\/h2>\n<p>Common draft angle mistakes are the main categories or options explained in this section. After two decades of reviewing mold designs, I see the same draft angle mistakes over and over. Here are the ones that cost the most money and time.<\/p>\n<figure style=\"text-align:center;margin:2em 0;\">\n<img decoding=\"async\" width=\"800\" height=\"457\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/11\/injection-molding-defects-guide.webp\" alt=\"Visual guide to common injection molding defects\" class=\"wp-image-51585 size-full\" style=\"max-width:100%;height:auto;\" srcset=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/11\/injection-molding-defects-guide.webp 800w, https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/11\/injection-molding-defects-guide-300x171.webp 300w, https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/11\/injection-molding-defects-guide-768x439.webp 768w, https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/11\/injection-molding-defects-guide-18x10.webp 18w, https:\/\/zetarmold.com\/wp-content\/uploads\/2025\/11\/injection-molding-defects-guide-600x343.webp 600w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><figcaption style=\"font-size:0.78em; color:#888; font-style:italic; margin-top:4px; text-align:center;\">\ubd88\ucda9\ubd84\ud55c \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c4\ub294 \uc131\ud615 \uacb0\ud568\uc744 \uc720\ubc1c\ud569\ub2c8\ub2e4<\/figcaption><\/figure>\n<p>Mistake 1: Specifying 0\u00b0 draft on cosmetic surfaces. Some designers think draft will be visible on show surfaces and therefore specify zero. The reality: 0.5\u00b0 is virtually invisible on most parts, and 1\u00b0 is imperceptible on anything larger than a medical micro-mold. Meanwhile, 0\u00b0 draft on a polished cosmetic surface means drag marks on every single part \u2014 which is a lot more visible than 1\u00b0 of taper.<\/p>\n<div class=\"claim claim-true\" style=\"background-color: #eff7ef; border-color: #eff7ef; color: #5a8a5a;\">\n<p><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"#16a34a\" stroke-width=\"2\"><path d=\"M9 16.17L4.83 12l-1.42 1.41L9 19 21 7l-1.41-1.41z\"\/><\/svg><b>\u201cA 1\u00b0 draft angle is virtually invisible on most injection molded parts, yet it prevents costly ejection problems.\u201d<\/b><span class=\"claim-true-or-false\">True<\/span><\/p>\n<p class=\"claim-explanation\">Many designers avoid draft on cosmetic surfaces, fearing visible taper. In reality, 0.5\u20131\u00b0 of draft is imperceptible on parts larger than a few centimeters. The drag marks caused by zero-draft ejection are far more visible and damaging to part appearance.<\/p>\n<\/div>\n<div class=\"claim claim-false\" style=\"background-color: #f7e8e8; border-color: #f7e8e8; color: #8a4a4a;\">\n<p><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"#dc2626\" stroke-width=\"2\"><line x1=\"18\" y1=\"6\" x2=\"6\" y2=\"18\"\/><line x1=\"6\" y1=\"6\" x2=\"18\" y2=\"18\"\/><\/svg><b>\u201cIf a part ejects fine during initial sampling, the draft angle is sufficient for production.\u201d<\/b><span class=\"claim-true-or-false\">False<\/span><\/p>\n<p class=\"claim-explanation\">Initial sampling uses a fresh, polished mold surface. After thousands of cycles, microscopic wear increases friction on marginal-draft features. What ejects cleanly on shot #10 may stick consistently by shot #5,000. Production reliability requires more draft than sampling suggests.<\/p>\n<\/div>\n<p>Mistake 2: Ignoring draft on ribs and bosses. Everyone remembers the outside walls. But internal ribs and bosses have the tightest ejection clearances and the smallest ejector pin contact area. These features need at least 0.5\u00b0 per side \u2014 and many designers leave them at 0\u00b0 because they\u2019re \u201csmall.\u201d A stuck rib is just as production-stopping as a stuck wall.<\/p>\n<p>Mistake 3: Not accounting for texture depth. This one happens when the texture specification is added after the mold design is finalized. The designer uses smooth-surface draft values, the texture gets applied later, and suddenly every part sticks. Always confirm the texture depth before finalizing draft.<\/p>\n<p>Mistake 4: Draft in the wrong direction. If you apply draft that tapers the part smaller at the parting line instead of larger, you\u2019ve created an undercut \u2014 the part now locks into the mold instead of releasing from it. This is a CAD error, but it gets through to tooling more often than you\u2019d think, especially on complex multi-core parts.<\/p>\n<p>Mistake 5: Insufficient draft on deep pockets. A 2\u00b0 draft on a 5 mm deep pocket is fine. The same 2\u00b0 on a 100 mm deep pocket may not be enough \u2014 the friction force scales with surface area, and a 100 mm deep wall has a lot of surface area. For deep features, increase draft progressively or use stepped drafts.<\/p>\n<p>The common thread in all these mistakes: they\u2019re all cheap to fix in CAD and expensive to fix in steel. Catching a draft problem on screen takes 30 minutes. Fixing it in a hardened steel cavity takes two weeks and thousands of dollars. That\u2019s why a thorough draft review should be part of every mold design sign-off before machining starts.<\/p>\n<div class=\"factory-insight\" data-fact-ids=\"company.experience_20_years,team.senior_engineers_8,equipment.injection_machines_47,equipment.tonnage_90_1850,capacity.mold_monthly_100_plus\" style=\"background:#f0f7ff;border-left:4px solid #0066cc;padding:12px 16px;margin:1.5em 0;\"><strong>\ud83c\udfed ZetarMold Factory Insight<\/strong><br \/>With 20+ years of experience, 8 senior engineers, 47 injection molding machines from 90T to 1850T, and in-house mold manufacturing capacity for 100+ mold sets per month, ZetarMold catches draft-related DFM risks before steel is cut.<\/div>\n<figure style=\"text-align:center;margin:2em 0;\">\n<img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"457\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/03\/im-vs-cnc-featured.webp\" alt=\"Injection molding vs CNC machining comparison for precision parts\" class=\"wp-image-52394 size-full\" style=\"max-width:100%;height:auto;\" srcset=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/03\/im-vs-cnc-featured.webp 800w, https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/03\/im-vs-cnc-featured-300x171.webp 300w, https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/03\/im-vs-cnc-featured-768x439.webp 768w, https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/03\/im-vs-cnc-featured-18x10.webp 18w, https:\/\/zetarmold.com\/wp-content\/uploads\/2026\/03\/im-vs-cnc-featured-600x343.webp 600w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><figcaption style=\"font-size:0.78em; color:#888; font-style:italic; margin-top:4px; text-align:center;\">\uc801\uc808\ud55c \ub4dc\ub798\ud504\ud2b8 \uc124\uacc4\ub97c \ud1b5\ud55c \uc0ac\ucd9c \uc131\ud615<\/figcaption><\/figure>\n<h2>\uc790\uc8fc \ubb3b\ub294 \uc9c8\ubb38<\/h2>\n<h3>What is the minimum draft angle for injection molding?<\/h3>\n<p>The absolute minimum is 0.25\u00b0 for very soft, flexible materials like TPU or LDPE with a polished mold surface. For most engineering plastics (ABS, PA66, PC) on a smooth surface, the practical minimum is 0.5\u20131\u00b0. Anything below 0.5\u00b0 is risky for production tooling and should only be used when the part geometry absolutely cannot accommodate more draft. In production environments, most molders recommend at least 1\u00b0 as a comfortable starting point for most materials to ensure reliable ejection over the full life of the tool.<\/p>\n<h3>Can you injection mold parts with zero draft angle?<\/h3>\n<p>Technically yes, but it requires special measures: generous use of mold release agents, very slow ejection speeds, and acceptance of higher scrap rates. Zero-draft parts typically need stripper plates instead of ejector pins, and even then, you\u2019ll see surface drag marks on every part. For any volume above prototyping, zero draft is a false economy that leads to inconsistent quality and costly mold rework. Most experienced molders will flag zero-draft features as a DFM risk and recommend at least minimal taper.<\/p>\n<h3>How does surface finish affect the required draft angle?<\/h3>\n<p>Surface finish is one of the most impactful factors in draft angle specification. A polished (SPI A-1) surface needs only 0.5\u20131\u00b0 draft for most materials because the smooth steel has low friction. A standard EDM finish (SPI C-1) needs 1.5\u20132\u00b0 extra because the spark-eroded texture grips the plastic mechanically. Textured surfaces need an additional 1\u20131.5\u00b0 per 0.001\u2033 of texture depth. Always get the finish specification confirmed before finalizing your draft values \u2014 changing the finish after tooling is cut is extremely expensive.<\/p>\n<h3>What draft angle is needed for textured surfaces?<\/h3>\n<p>For textured surfaces, add 1\u20131.5\u00b0 of draft per 0.001\u2033 (0.025 mm) of texture depth. A light sandblast texture at 0.001\u2033 needs about 1\u20131.5\u00b0 extra. A deep leather grain at 0.004\u2033 needs 4\u20136\u00b0 extra, on top of your base material draft. Inner surfaces (core side) need more than outer surfaces (cavity side) because shrinkage grips the core tighter. Always verify the exact texture depth with your mold texturing supplier, as different suppliers may have slightly different depth specifications for the same nominal texture pattern.<\/p>\n<h3>Does draft angle affect part dimensional accuracy?<\/h3>\n<p>Yes, but the effect is usually negligible at normal draft values. A 2\u00b0 draft on a 50 mm tall wall changes the top dimension by approximately 1.75 mm per side. If your part has tight tolerances on that wall, you need to account for the taper in your tolerance stack and specify which dimension is the reference (top, bottom, or midpoint). For most applications under 3\u00b0 draft, the dimensional impact is within standard molding tolerances (\u00b10.1\u20130.3 mm) and won\u2019t cause functional issues.<\/p>\n<h3>How much draft angle does polycarbonate need?<\/h3>\n<p>\uc0ac\ucd9c \uc131\ud615 \ub300 CNC \uac00\uacf5 \ube44\uad50: \uc815\ubc00 \ubd80\ud488\uc6a9<\/p>\n<h3>What happens if the draft angle is too small?<\/h3>\n<p>The symptoms are progressive and get worse over the tool\u2019s life. First, you\u2019ll notice faint drag marks or gloss changes on the part surface where the plastic scraped against the steel. Then parts start sticking intermittently, requiring slower ejection speeds or operator intervention. As the mold surface degrades, you\u2019ll see increasing scuffing, scratching, and warpage from uneven ejection forces. In severe cases, parts crack during removal. The mold surface also wears faster in low-draft areas, creating a downward spiral of worsening quality and increasing scrap rates. If in doubt, always consult with your molder before finalizing the design.<\/p>\n<p>Need a Quote for Your Injection Molding Project?<\/p>\n<p>Before you send your next mold design to tooling, run this quick checklist: every vertical face has \u22651\u00b0 draft, textured surfaces have extra draft matching texture depth, ribs and bosses aren\u2019t forgotten, and draft direction follows mold opening. If any box is unchecked, fix it in CAD now \u2014 your production team will thank you later. Need expert eyes on your design? Get competitive pricing, DFM feedback (including draft angle review), and production timeline from ZetarMold\u2019s engineering team. With 47 injection molding machines (90T to 1850T), 400+ materials processed, and 20+ years of experience, we catch draft-related issues before they become production problems.<\/p>\n<p>\ubb34\ub8cc \uacac\uc801 \uc694\uccad \u2192 \ub4dc\ub798\ud504\ud2b8 \uac80\ud1a0\ub97c \uba38\uc2e0 \uce21 \uacf5\uc815 \uc548\uc815\uc131\uacfc \uc5f0\uacb0\ud558\ub824\uba74 \uc2a4\ud06c\ub958 \uc0ac\ucd9c \uc131\ud615\uae30 \uac00\uc774\ub4dc\ub97c \uc0ac\uc6a9\ud558\uc138\uc694.<\/p>\n<hr style=\"margin:2em 0;border:none;border-top:1px solid #e0e0e0;\" \/>\n<ol class=\"footnotes\">\n<li id=\"fn:1\">\n<p><strong>draft angle:<\/strong> draft angle refers to is the taper applied to vertical surfaces of a mold cavity or core to facilitate removal of the molded part after the injection molding cycle. <a href=\"#fnref1:1\" class=\"footnote-backref\">\u21a9<\/a><\/p>\n<\/li>\n<li id=\"fn:2\">\n<p><strong>ejection:<\/strong> Ejection refers to the phase of the injection molding cycle where the cooled part is pushed out of the mold using pins, plates, or air blast systems. <a href=\"#fnref1:2\" class=\"footnote-backref\">\u21a9<\/a><\/p>\n<\/li>\n<li id=\"fn:3\">\n<p><strong>shrinkage:<\/strong> shrinkage refers to is the reduction in part dimensions that occurs as molten plastic cools and solidifies, typically ranging from 0.2% to 2.5% depending on the material. <a href=\"#fnref1:3\" class=\"footnote-backref\">\u21a9<\/a><\/p>\n<\/li>\n<\/ol>","protected":false},"excerpt":{"rendered":"<p>\uc0ac\ucd9c \uc131\ud615 \ubd80\ud488\uc774 \uae08\ud615\uc5d0\uc11c \ub9c9 \ub098\uc654\uc2b5\ub2c8\ub2e4 \u2014 \uadf8\ub7f0\ub370 \uc2e4\uc81c\ub85c\ub294 \ub098\uc624\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \ucf54\uc5b4\uc5d0 \ub9c8\uce58 \uc811\ucc29\uc81c\ub85c \ubd99\uc5b4 \uc788\ub294 \uac83\ucc98\ub7fc \ub07c\uc5b4 \uc788\uc2b5\ub2c8\ub2e4. \uc774\uc81c \uc5ec\ub7ec\ubd84\uc740 \uc190\uc0c1\ub41c \ubd80\ud488, \uae01\ud78c \uce90\ube44\ud2f0, \uadf8\ub9ac\uace0 \uba48\ucdb0\ubc84\ub9b0 \uc0dd\uc0b0 \ub77c\uc778\uc744 \ub9c8\uc8fc\ud558\uace0 \uc788\uc2b5\ub2c8\ub2e4. \uc5f4\uc5d0 \uc544\ud649\uc740 \ub4dc\ub798\ud504\ud2b8 \uac01\ub3c41 \ubd80\uc871\uc774 \uc6d0\uc778\uc785\ub2c8\ub2e4. \uc774\ubc88 [\u2026]<\/p>","protected":false},"author":1,"featured_media":53228,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"Draft Angle in Injection Molding: Complete Design Guide | ZetarMold","_seopress_titles_desc":"Learn how draft angle affects injection molded parts. Includes material tables, calculation methods, and tips from 20+ years of mold-making experience.","_seopress_robots_index":"","_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[73],"tags":[205,48,89],"meta_box":{"post-to-quiz_to":[]},"_links":{"self":[{"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/posts\/16486"}],"collection":[{"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/comments?post=16486"}],"version-history":[{"count":0,"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/posts\/16486\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/media\/53228"}],"wp:attachment":[{"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/media?parent=16486"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/categories?post=16486"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/zetarmold.com\/ko\/wp-json\/wp\/v2\/tags?post=16486"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}