{"id":5619,"date":"2022-04-08T14:08:41","date_gmt":"2022-04-08T06:08:41","guid":{"rendered":"https:\/\/zetarmold.com\/?p=5619"},"modified":"2026-04-09T08:32:44","modified_gmt":"2026-04-09T00:32:44","slug":"werkzeugtemperatur-spritzgiesen","status":"publish","type":"post","link":"https:\/\/zetarmold.com\/de\/werkzeugtemperatur-spritzgiesen\/","title":{"rendered":"Was ist die Werkzeugtemperatur beim Spritzgie\u00dfen?"},"content":{"rendered":"<figure class=\"wp-block-embed is-type-rich is-provider-spotify wp-block-embed-spotify wp-embed-aspect-21-9 wp-has-aspect-ratio\">\n<div class=\"wp-block-embed__wrapper\">\n<iframe title=\"Spotify Embed: What is mold temperature in &lt;a href=\"https:>Spritzgussform<\/a>Spotify Embed: Was ist die Formtemperatur in &lt;a href=<\/iframe>\n<\/div>\n<\/figure>\n<p><strong>What is the mold temperature in injection molding? This is a question that many people have, but don\u2019t know where to find the answer to.<\/strong><\/p>\n<p><strong>In this blog post, we will discuss what mold temperature is and how it affects your injection molded parts.<\/strong><\/p>\n<p><strong>Mold temperature is the most important variable in injection molding \u2013 regardless of the type of plastic being molded, the temperature that forms the base of the mold surface must be ensured.<\/strong><\/p>\n<p>Eine hei\u00dfe Formoberfl\u00e4che h\u00e4lt die Kunststoffoberfl\u00e4che lange genug fl\u00fcssig, um Druck im Inneren der Kavit\u00e4t aufzubauen.<\/p>\n<p>Wenn die Kavit\u00e4t gef\u00fcllt ist und der Kavit\u00e4tsdruck den weichen Kunststoff gegen das Metall pressen kann, bevor die gefrorene Haut auszuh\u00e4rten scheint, dann repliziert die Kavit\u00e4tsoberfl\u00e4che stark.<\/p>\n<p>Wenn hingegen Kunststoff, der bei niedrigem Druck in die Kavit\u00e4t eintritt, in der Schwebe bleibt, und sei es auch nur f\u00fcr kurze Zeit, kann sein leichter Kontakt mit dem Metall zu Fleckenbildung f\u00fchren, die manchmal als Anschnittschmieren bezeichnet wird.<\/p>\n<p>F\u00fcr jede Art von Kunststoff und Kunststoffteil gibt es eine Oberfl\u00e4chentemperaturgrenze, bei deren \u00dcberschreitung ein oder mehrere unerw\u00fcnschte Effekte auftreten k\u00f6nnen (z. B. k\u00f6nnen Bauteile Grate bilden).<\/p>\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-1 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:100%\">\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img fetchpriority=\"high\" decoding=\"async\" width=\"564\" height=\"564\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/1-7.jpg\" alt=\"\" class=\"wp-image-5621\" style=\"width:600px;height:500px\" srcset=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/1-7.jpg 564w, https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/1-7-300x300.jpg 300w, https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/1-7-150x150.jpg 150w, https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/1-7-100x100.jpg 100w\" sizes=\"(max-width: 564px) 100vw, 564px\" \/><figcaption class=\"wp-element-caption\">Source: https:\/\/www.pinterest.com\/pin\/233202086945143608\/<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n<h2 class=\"wp-block-heading\"><span class=\"has-inline-color has-vivid-cyan-blue-color\">Welche Auswirkungen haben h\u00f6here Schimmelpilztemperaturen?<\/span><\/h2>\n<p>Higher mold temperatures mean less resistance to flow. On many injection molding machines, this naturally means faster flow through runners, gates, and cavities because the injection flow control valves used do not correct for this change, and faster filling causes higher effective pressure in the gates and cavities. This can cause overflow burrs.<\/p>\n<p>Da das hei\u00dfere Modell den Kunststoff, der in den \u00dcberlaufkantenbereich eintritt, nicht einfriert, bevor hohe Dr\u00fccke entstehen, kann die Schmelze um den Auswerferbalken herum \u00fcberlaufen und in den Trennelementspalt gelangen.<\/p>\n<p>Dies zeigt, dass eine gute Steuerung der Einspritzrate erforderlich ist, und einige moderne Durchflusssteuerungsprogramme k\u00f6nnen dies in der Tat leisten.<\/p>\n<p>In der Regel verringert eine Erh\u00f6hung der Werkzeugtemperatur die Menge des Kunststoffs, der am Morgen eine Kondensationsschicht in der Kavit\u00e4t bildet, wodurch das geschmolzene Material leichter in die Kavit\u00e4t flie\u00dfen kann, was zu einem h\u00f6heren Teilegewicht und einer besseren Oberfl\u00e4chenqualit\u00e4t f\u00fchrt.<\/p>\n<p>Gleichzeitig f\u00fchrt die Erh\u00f6hung der Werkzeugtemperatur auch zu einer Erh\u00f6hung der Bauteilzugfestigkeit.<\/p>\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-2 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:100%\">\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img decoding=\"async\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/11-2.jpg\" alt=\"\" class=\"wp-image-5662\" style=\"width:600px\"\/><figcaption class=\"wp-element-caption\">Source: https:\/\/www.pinterest.com\/pin\/712342866056706444\/<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n<h2 class=\"wp-block-heading\"><span class=\"has-inline-color has-vivid-cyan-blue-color\">Wie sollte ich die Temperatur der Form beim Spritzgie\u00dfen w\u00e4hlen?<\/span><\/h2>\n<p>Die Temperatur der Form wirkt sich auf das Flie\u00dfverhalten der Kunststoffschmelze beim Bef\u00fcllen aus und beeinflusst die Leistung des Kunststoffprodukts.<\/p>\n<p>Die Temperatur des Werkzeugs bestimmt die Abk\u00fchlgeschwindigkeit der Schmelze. Je schneller die Abk\u00fchlungsgeschwindigkeit, desto schneller sinkt die Temperatur der Schmelze, was die Viskosit\u00e4t erh\u00f6ht und das Flie\u00dfen erschwert, was zu einem erh\u00f6hten Einspritzdruckverlust und einem niedrigeren effektiven Formf\u00fclldruck f\u00fchrt und sogar eine Unterf\u00fcllung verursacht.<\/p>\n<p>In der Regel sollte die Formtemperatur entsprechend den Eigenschaften des verarbeiteten Kunststoffs, den Leistungsanforderungen des Produkts, der Form und Gr\u00f6\u00dfe des Produkts und den Prozessbedingungen des Formprozesses usw. f\u00fcr eine umfassende Betrachtung bestimmt werden.<\/p>\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-3 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:100%\">\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img decoding=\"async\" width=\"564\" height=\"300\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/5-1.jpg\" alt=\"\" class=\"wp-image-5632\" style=\"width:600px;height:360px\" srcset=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/5-1.jpg 564w, https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/5-1-300x160.jpg 300w\" sizes=\"(max-width: 564px) 100vw, 564px\" \/><figcaption class=\"wp-element-caption\">Source: https:\/\/www.pinterest.com\/pin\/362469470021555218\/<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n<p>(1) F\u00fcr Kunststoffe mit h\u00f6herer Viskosit\u00e4t, wie z. B. PC, ist es angebracht, eine h\u00f6here Formtemperatur zu verwenden, w\u00e4hrend Kunststoffe mit geringerer Viskosit\u00e4t, wie z. B. PA, PS usw., eine niedrigere Formtemperatur ben\u00f6tigen.<\/p>\n<p>Wenn die Temperatur der Form sinkt, steigen die Erstarrungsgeschwindigkeit und die Abk\u00fchlungsgeschwindigkeit des Kunststoffs, was sich positiv auf die Produktivit\u00e4t und die Verk\u00fcrzung des Produktionszyklus auswirkt.<\/p>\n<p>(2) Um eine Verformung beim Entformen zu vermeiden, sollte die Formtemperatur in der Regel niedriger sein als die Glas\u00fcbergangstemperatur des Kunststoffs oder die Temperatur, bei der eine Verformung des Produkts weniger wahrscheinlich ist, aber die Entformungstemperatur des Produkts sollte etwas h\u00f6her sein als die Formtemperatur. Die Formtemperatur h\u00e4ngt von der Wandst\u00e4rke und der Restspannung des Produkts ab.<\/p>\n<p>(3) Formtemperatur auf Kunststoff-Kristallisation, molekulare Orientierung, Produkt Stress, und verschiedene mechanische neue Energie. Eine niedrige Formtemperatur beg\u00fcnstigt die Kristallisation des Polymers.<\/p>\n<p>Bei dickwandigen Produkten f\u00fchrt eine zu niedrige Formtemperatur aufgrund der langen Formf\u00fcll- und Abk\u00fchlzeit zur Bildung von Vakuumblasen und zur Schrumpfung des Produkts sowie zu inneren Spannungen, so dass f\u00fcr dickwandige Produkte keine niedrige Formtemperatur verwendet werden sollte.<\/p>\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-4 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:100%\">\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"496\" height=\"280\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/9-1-1.jpg\" alt=\"\" class=\"wp-image-5637\" style=\"width:600px;height:300px\" srcset=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/9-1-1.jpg 496w, https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/9-1-1-300x169.jpg 300w\" sizes=\"(max-width: 496px) 100vw, 496px\" \/><figcaption class=\"wp-element-caption\">Source: https:\/\/www.pinterest.com\/pin\/521432463077966129\/<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n<h2 class=\"wp-block-heading\"><span class=\"has-inline-color has-vivid-cyan-blue-color\">System zur Regulierung der Werkzeugtemperatur<\/span><\/h2>\n<p>The plastic injection molding process is the injection of molten plastic into the mold cavity at high pressure, after which the molten material is cooled in the mold cavity and cured below the heat deflection temperature of the plastic.<\/p>\n<p>This process is realized by the temperature difference between the melt and the mold. Since different molding materials require different mold temperatures (mold temperature should be lower than the heat deflection temperature of the plastic part), if the mold temperature is too high or too low, it will affect the quality and production of the plastic part.<\/p>\n<p>A. <strong>Zu hoch<\/strong>: overflow; shrinkage; long curing time of plastic parts, long injection molding cycle, and low productivity.<\/p>\n<p>B.<strong> Zu niedrig<\/strong>Schlechte Flie\u00dff\u00e4higkeit der Schmelze f\u00fchrt zu einer erh\u00f6hten Belastung des Kunststoffteils und zu Fehlern wie schlechter F\u00fcllung, Schmelzspuren, Materialmangel und fehlendem Glanz auf der Oberfl\u00e4che.<\/p>\n<p>C. <strong>Ungleiche<\/strong> Abweichung der Schrumpfungsrate, Verformung von Kunststoffteilen usw.<\/p>\n<p>Daher muss bei der Konstruktion der Form eine K\u00fchl- oder Heizvorrichtung vorgesehen werden, um die Temperatur der Form und den Einspritzzyklus zu regulieren.<br \/>(1) Wenn die Temperatur des Formmaterials nicht ausreicht, um die Form auf die f\u00fcr die Formgebung erforderliche Temperatur zu bringen, sollte die Heizvorrichtung in Betracht gezogen werden.<\/p>\n<p>(2) When molding plastic parts with wall thickness greater than 20mm, then the heating device should be considered.<\/p>\n<p>(3) Wenn das Material Temperatur macht die Form Temperatur \u00fcberschreitenld Temperatur f\u00fcr das Gie\u00dfen erforderlich, dann die K\u00fchlung Ger\u00e4t sollte in Betracht gezogen werden.<\/p>\n<p>(4) Beim Gie\u00dfen von Thermoplasten muss die Form im Allgemeinen gek\u00fchlt werden; bei Duroplasten muss die Form erw\u00e4rmt werden.<\/p>\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-5 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:100%\">\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"564\" height=\"360\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/10-1.jpg\" alt=\"\" class=\"wp-image-5648\" style=\"width:600px\" srcset=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/10-1.jpg 564w, https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/04\/10-1-300x191.jpg 300w\" sizes=\"(max-width: 564px) 100vw, 564px\" \/><figcaption class=\"wp-element-caption\">Source: https:\/\/www.pinterest.com\/pin\/643662971734886319\/<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n<h2 class=\"wp-block-heading\"><span class=\"has-inline-color has-vivid-cyan-blue-color\">Zweck der Regelung der Werkzeugtemperatur<\/span><\/h2>\n<p>A. Verk\u00fcrzen Sie den Formgebungszyklus: Halten Sie die Temperatur der W\u00e4rmeverformung des Kunststoffs durch wirksame K\u00fchlung niedrig.<\/p>\n<p>B. Verbessern Sie die Qualit\u00e4t der Kunststoffteile: um die Verformung der Entformung zu verhindern.<\/p>\n<p>C. Adapt to special needs: when injecting crystalline plastitor to control the crystallinity of the plastic and improve its overall performance, it is generally required to maintain a higher mold temperature; large molds need to be preheated before injection molding; local heating of the mold for special needs; heating of the hot runner system, etc.<\/p>\n<h2 class=\"wp-block-heading\"><span class=\"has-inline-color has-vivid-cyan-blue-color\">Wege zur Isolierung von Schimmelpilzen<\/span><\/h2>\n<p>Viele Formen, insbesondere f\u00fcr technische Thermoplaste, arbeiten bei relativ hohen Temperaturen, z. B. bei 80 Grad Celsius oder 176 Grad Fahrenheit.<\/p>\n<p>If the mold is not insulated, as much heat can easily be lost to the air and the injection molding machine as is lost to the injection cylinder. To insulate the mold from the machine plate and if possible, insulate the surface of the mold.<\/p>\n<p>If considering a hot runner mold, try to reduce the heat exchange between the hot runner section and the cooled injection molded part. Such a method can reduce energy loss and preheating time.<\/p>\n<h3 class=\"wp-block-heading has-vivid-cyan-blue-color has-text-color\">1. <span class=\"has-inline-color has-vivid-cyan-blue-color\">Messung der Temperatur<\/span><\/h3>\n<p>Temperature measurement and control are very important in injection molding. Although it is relatively simple to perform these measurements, most <a href=\"https:\/\/zetarmold.com\/de\/\" target=\"_blank\" rel=\"noreferrer noopener\">Spritzgie\u00dfen<\/a> Die Maschinen verf\u00fcgen nicht \u00fcber ausreichende Temperaturaufnahmestellen oder -leitungen.<\/p>\n<p>In den meisten<a href=\"https:\/\/zetarmold.com\/de\/\" data-type=\"URL\" data-id=\"https:\/\/zetarmold.com\/\" target=\"_blank\" rel=\"noreferrer noopener\"> Kunststoff-Spritzguss<\/a> Maschinen wird die Temperatur mit Thermoelementen gemessen. Ein Thermoelement besteht aus zwei verschiedenen Dr\u00e4hten, die am Ende miteinander verbunden sind. Wenn ein Ende hei\u00dfer ist als das andere, wird ein winziges elektrisches Signal erzeugt; je st\u00e4rker es erhitzt wird, desto st\u00e4rker ist das Signal.<\/p>\n<h3 class=\"wp-block-heading has-vivid-cyan-blue-color has-text-color\">2. <span class=\"has-inline-color has-vivid-cyan-blue-color\">Temperaturkontrolle<\/span><\/h3>\n<p>Das Thermoelement wird auch h\u00e4ufig als Sensor f\u00fcr ein Schmelzetemperaturregelsystem verwendet. Am Werkzeugtemperaturregler wird die gew\u00fcnschte Schmelzetemperatur eingestellt und die Anzeige des Sensors wird mit der am Sollwert erzeugten Temperatur verglichen.<\/p>\n<p>Bei diesem einfachsten System wird der Strom abgeschaltet, wenn die Formteiltemperatur den Sollwert erreicht, und wieder eingeschaltet, wenn die Temperatur sinkt. Dieses System wird als Ein\/Aus-Regelung bezeichnet, weil es entweder ein- oder ausgeschaltet ist.<\/p>\n<h3 class=\"wp-block-heading has-vivid-cyan-blue-color has-text-color\">3. <span class=\"has-inline-color has-vivid-cyan-blue-color\">Schmelztemperatur<\/span><\/h3>\n<p>Die Temperatur des Schmelzklebers ist sehr wichtig, und die verwendete Spritzzylindertemperatur ist nur ein Richtwert. Die Schmelzetemperatur kann an der Einspritzd\u00fcse oder mit Hilfe der Lufteinspritzmethode gemessen werden.<\/p>\n<p>Die Temperatureinstellung des Einspritzzylinders ist abh\u00e4ngig von der Schmelzetemperatur, der Schneckendrehzahl, dem Gegendruck, der Einspritzmenge und dem Einspritzzyklus.<\/p>\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-6 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:100%\">\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"563\" height=\"383\" src=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/03\/httpswww.pinterest.compin604186106262440921.jpg\" alt=\"\" class=\"wp-image-4117\" style=\"width:600px\" srcset=\"https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/03\/httpswww.pinterest.compin604186106262440921.jpg 563w, https:\/\/zetarmold.com\/wp-content\/uploads\/2022\/03\/httpswww.pinterest.compin604186106262440921-300x204.jpg 300w\" sizes=\"(max-width: 563px) 100vw, 563px\" \/><\/figure>\n<\/div>\n<\/div>\n<\/div>\n<h2 class=\"wp-block-heading\"><span class=\"has-inline-color has-vivid-cyan-blue-color\">Zusammenfassung<\/span><\/h2>\n<p>Sie sollten mit der niedrigsten Einstellung beginnen, wenn Sie keine Erfahrung mit der Verarbeitung einer bestimmten Kunststoffart haben. Die Einspritzzylinder sind zur leichteren Steuerung in Zonen unterteilt, aber nicht alle sind auf dieselbe Temperatur eingestellt.<\/p>\n<p>Bei l\u00e4ngerem Betrieb oder hohen Temperaturen sollte die Formtemperaturregelung in der ersten Zone auf einen niedrigeren Wert eingestellt werden, um ein vorzeitiges Schmelzen und Rangieren des Kunststoffs zu verhindern.<\/p>\n<p>Vergewissern Sie sich, dass die Hydraulikfl\u00fcssigkeit, die Trichterschlie\u00dfer, die Formen und die Einspritzzylinder die richtige Temperatur haben, bevor die Einspritzung beginnt.<\/p>\n<div style=\"background:#f0f4f8;padding:20px;border-radius:8px;margin-top:30px;\">\n<p style=\"margin:0 0 10px;font-size:18px;\"><strong>Need a Quote for Your Injection Molding Project?<\/strong><\/p>\n<p style=\"margin:0 0 10px;\">Get competitive pricing, DFM feedback, and production timeline from ZetarMold\u2019s engineering team.<\/p>\n<p style=\"margin:0;\"><a href=\"https:\/\/zetarmold.com\/de\/kontaktieren-sie-uns\/\" style=\"background:#2563eb;color:white;padding:12px 24px;border-radius:6px;text-decoration:none;font-weight:bold;\">Request a Free Quote \u2192<\/a> See our <a href=\"https:\/\/zetarmold.com\/de\/spritzgiesen-komplettleitfaden\/\">Injection Molding Complete Guide<\/a> for a comprehensive overview.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":5622,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"Mold Temperature in Injection Molding? | ZetarMold","_seopress_titles_desc":"Discover expert insights on mold temperature injection molding from ZetarMold. We provide professional injection molding services with DFM support, fast","_seopress_robots_index":"","_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[43],"tags":[226],"meta_box":{"post-to-quiz_to":[]},"_links":{"self":[{"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/posts\/5619"}],"collection":[{"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/comments?post=5619"}],"version-history":[{"count":0,"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/posts\/5619\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/media\/5622"}],"wp:attachment":[{"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/media?parent=5619"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/categories?post=5619"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/zetarmold.com\/de\/wp-json\/wp\/v2\/tags?post=5619"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}